Logistical Solutions for Bulk liquids and Gases

Tanks available immediately from stock

Who are we?

FORTY YEARS A WORLD LEADER IN TANK MANUFACTURE!


welding tank shell
UBH International has for many years occupied a leading place amongst the world’s manufacturers of tank containers.

What sets us apart?

TOP QUALITY – LOW TARE WEIGHT!


iso tanks
  • Quality of design and construction.
  • Low tare weight – maximum payload.
  • Superb finish.
  • Low susceptibility to damage.
  • Enormous resilience and reliability.
  • Low maintenance costs. Ease of repair.

How do we do it?

FOCUS AND CONTINUITY!


offshore tank container stack
  • Almost half a century of experience.
  • Policy of continuous improvement.
  • Attention to customer needs.
  • Employee-owned company.

Universal Beam Tank


 - the modern standard for strong, light, economical tankcontainers

Although the majority of UBH tanks are built to specific customer order, we sometimes have a small number of tanks available for immediate delivery from stock.

10ft DNV-approved offshore chemical tanks – 6 available

These 10ft ISO-framed chemical tanks are widely used in the oil and gas industry around the world and can be easily bolted together to form a single 20ft unit for deep sea transported and then separated on arrival at site for ease of handling:

10 ft DNV offshore chemical tank
  • Capacity : 2000 US Gallons,– 2% + 2% (7580 litres nominal)
  • TARE Weight : 2400kg nominal.
  • Max. Gross : 13,000kg
  • Pressure : 4.0 bar (working); 6.0 bar (test).
  • Design temp. : -20 to 65ºC. TYPE
  • Approvals : T11 UN Portable tank (incl. IMDG and ADR), TIR, CSC, EN 12079, DNV 2.7-1.

Click here for specification sheet

10ft DNV-approved 2000-gallon offshore tank for Nitrogen – two available

The 10ft N2 tank is commonly used for well-stimulation and other operational needs in both land based and offshore oilfield applications:

10ft DNV offshore nitrogen tank
  • Capacity : 2,000 US Gallon Nominal.
  • TARE Weight : 4,850kg nominal.
  • Max. Gross : 16,000kg.
  • Product : Liquid Nitrogen.
  • Working pressure : 6 bar.
  • Service temp. : -196°C to 50°C. Vessel & pipework.
  • Performance : 0.55% per day based on LN2.
  • Approvals : T75 UN Portable tank (IMDG ADR/RID), TIR, CSC, DNV 2.7-1

Click here for specification sheet

35000-litre Stainless Steel Storage/mixing vessel or Silo – one available

This vessel was originally built for use in an anaerobic digestion facility – the project never came to fruition and the tank has never been used – can be modified to suit customer requirements:

stainless storage silo
  • 35000-litre Atmospheric vessel
  • Vertical cylindrical tank with top dished end and conical bottom end
  • Various fittings including 600mm manway in top end and 600mm manway in shell
  • Inside Dia. 2800mm.
  • Shell straight length: 5300mm; cone length: 1007mm
  • Material of construction: shell 316 stainless (shell 4.00 mm, end & cone 5.00mm); support legs/doublers/lugs in 304 stainless.
  • Design Pressure 0.1 bar
  • Working pressure atmospheric
  • Design temperature: -20 to +150 deg C
  • Internal Finish: welds &ground areas not coarser than 180 grit; plate as supplied (2B)
  • Design Code: ASME VIII Div. 1

Click here for specification sheet

Click here for drawing

50000-litre Stainless Steel Storage/mixing vessel or Silo – one available

Originally built for use in an anaerobic digestion facility – the project never came to fruition and the tank has never been used - can be modified to suit customer requirements:

stainless storage tank
  • 50000-litre Atmospheric vessel
  • Vertical cylindrical tank with top dished end and conical bottom end
  • Various fittings including 600mm manway in top end and 600mm manway in shell
  • Inside Dia. 3300mm.
  • Shell straight length: 5300mm; cone length: 1797mm
  • Material of construction: shell 316 stainless (shell 4.00 mm, end & cone 5.00mm); support legs/doublers/lugs in 304 stainless.
  • Design Pressure 0.1 bar
  • Working pressure atmospheric
  • Design temperature: -20 to +80 deg C
  • Internal Finish: welds &ground areas not coarser than 180 grit; plate as supplied (2B)
  • Design Code: ASME VIII Div. 1

Click here for specification sheet

Click here for drawing

3900-litre Stainless Steel Process/Pressure Vessel – four available
Type A x 2 : Type B x 2

Designed as sterilisation tanks for use in an anaerobic waste facility which was never completed – these tanks are brand new and completely unused – can be modified to suit customer requirements:

3900 litre stainless pressure vessel
  • 3900-litre Pressure Vessel
  • Vertical Cylindrical tank with torispherical Dished ends
    (top suitable for fitting of agitator)
  • Material of Construction: 316 stainless • Volume: 3.9 m3
  • Dia: 1500mm
  • Shell straight length: 1900mm
  • Design pressure: 7 barg
  • Design Temp: -20 to +170 deg C
  • Design Code: ASME VIII
  • Lifting supports: Lugs on top

Click here for specification sheet

Click here for drawing – Type A
Click here for drawing – Type B

  • Tel: +44(0)1704 898500
  • Fax: +44(0)1704 898518
  • Email:
© 2018 UBH International Limited
Orrell Lane
Burscough
L40 0SL

Website JHA